Our Specification

An integrated remote controller with datalink, video and remote control. Dual redundancy, dual antenna and dual module design.

• RC/Data/video Transmission
• Approximately 8km transmission distance
• 12 channels
• Support: Bus / PPM / PWM / 12C
• Bluetooth and USB connection
• 4G 100mw
• -10°C < 45°C
• 1-4 hour operation

2 quick release T200 motors with ESC Speed Controllers

Field tested with a simple removal system for transport and replacement of motors.

Electrical operation:

• Voltage 6-20 volts
• Max Current 25 Amps
• Max Power 350 Watts Phase Resistance 18 +/- 0.01
• Ohms Phase Inductance (@ 1 kHz) 077 +/- 0.008 mH

Performance:

• Maximum Forward Thrust @ 16V 1 kgf 11.2 lbf
• Maximum Reverse Thrust @ 16V 1 kgf 9.0 lbf
• Maximum Forward Thrust @ 12V 55 kgf 7.8 lbf
• Maximum Reverse Thrust @ 12V 0 kgf 6.6 lbf
• Minimum Thrust 01 kgf 0.02 lbf
• Rotational Speed 300-3800 rev/min

• 83/200kHz broadband sonar frequencies
• Medium and High CHIRP frequencies
• Side and down scan capture
• Single beam, dual frequency 200/450kHZ

L1/L2 bands on GPS, GLONASS and BeiDou and E1/E5 on Galileo and onboard navigational GPS

• raw data RINEX log
• Controlled via the ReachView app
• up to 60 km for RTK and up to 100 km for PPK.

Top of the range flight controller and IMU for ROV builds

• Single IMU sensor
• Single Baro Sensor
• The entire flight management unit (FMU) and inertial management unit (IMU) are housed in a small form factor

Processor:

• 32-bit ARM Cortex M4 core with FPU
• 168 Mhz/256 KB RAM/2 MB Flash
• 32-bit failsafe co-processor

Sensors:

• 1 x IMU (accels, gyros and compass)
• 1 x InvenSense MPU9250 (accel and gyro)
• 1 x MS5611 barometers

Payload of 28Kg’s

Boat dimensions:

• Weight: Under 15kg
• Dimensions: 140x50x40(cm)
• Dual Redundancy Controller

Safety Options:

• Loiter mode
• Failsafes
• Waterproof control box
• Plastic hull provides tremendous buoyancy